Comb Plate
Comb plate

Comb Plate

The comb plate is located at both ends of the exit entrance, in order to facilitate the passenger transition and with the ladder, pedal or automatic sidewalk tape meshing parts. The ends shall be rounded in a shape that minimizes the risk of clamping between steps, pedals or adhesive tape. The support structure shall be adjustable to ensure proper engagement and proper stiffness.
Product Detail

What is comb plate for escalator units?


The comb plate is located at both ends of the exit entrance, to facilitate passenger transition and engage with steps, pedals or automatic sidewalk tape. The ends are rounded and shaped to minimize the risk of foot clamping between steps, pedals or tape. The section of the Floor Plate on which the comb teeth segments are mounted.


The comb tooth plate is the safety protection device of the elevator. There is a micro switch behind the comb tooth plate. If a foreign body gets stuck, the elevator can stop running.


A section or steel plate with teeth that mesh with the Step cleats at the boarding and landing areas, to prevent fingers, feet or foreign objects from getting caught between the moving Steps and Floor Plate.


Comb teeth are installed at the entrance, meshing with the groove on the ladder or pedal surface, with anti-skid parts. There should be a shape and a slope (e.g. a design Angle of no more than 40°) so that passengers will not trip when exiting an escalator or moving walk. The ends shall be made of brittle plastic or aluminum or rubber to ensure that the object can be released when clamped.


When the foreign body is stuck between the step pedal and the comb tooth, so that the ladder can not engage with the comb tooth plate normally, the comb tooth will bend or break, so that the ladder still can not enter the comb tooth plate, which will lead to the damage of important machinery. The standard states that when this happens, there should be a device to stop the escalator. This safety protection device is often referred to as the comb tooth plate safety switch.


In order to ensure the safety of passengers on and off the escalator, Comb tooth plate must be installed at the entrance and exit of the escalator.


The comb plate is located at both ends of the exit entrance, in order to facilitate the passenger transition and with the ladder, pedal or automatic sidewalk tape meshing parts. The ends shall be rounded in a shape that minimizes the risk of clamping between steps, pedals or adhesive tape. The support structure shall be adjustable to ensure proper engagement and proper stiffness.


Comb teeth are installed at the entrance, meshing with the groove on the ladder or pedal surface, with anti-skid parts. There should be a shape and a slope (e.g. a design Angle of no more than 40°) so that passengers will not trip when exiting an escalator or moving walk. The ends shall be made of brittle plastic or aluminum or rubber to ensure that the object can be released when clamped.


The comb tooth plate is the safety protection device of the elevator. There is a micro switch behind the comb tooth plate. If a foreign body gets stuck, the elevator can stop running.

产品--comb-plate.jpg产品--comb-plate1.jpg产品--comb-plate2.jpg


Related products
Inquiry Now
Name: *
Mobile:
E-mail: *
Message: *
Verification code: *